How to Update MStar DVR Firmware with MStar ISP Tool
MStar ISP tool is a software application that allows you to update the firmware of MStar digital video recorders (DVRs). MStar DVRs are widely used in various brands of smart TVs, such as TCL, Hisense, Skyworth, Konka, Changhong, etc. Updating the firmware can improve the performance and stability of your DVR, as well as fix some bugs and add new features.
In this article, we will show you how to use MStar ISP tool to update your MStar DVR firmware step by step. You will need a Windows PC, a USB cable, and a MStar ISP tool zip file that contains the software and the firmware files. You can download the MStar ISP tool zip file from the official website of your TV brand or from some online forums[^1^] [^2^].
Step 1: Install MStar ISP Tool on Your PC
First, you need to install MStar ISP tool on your PC. To do this, follow these steps:
Mstar Isp Tool Zip
Download Zip: https://urlin.us/2tGfaU
Extract the MStar ISP tool zip file to a folder on your PC.
Open the folder and double-click on the setup.exe file to launch the installation wizard.
Follow the instructions on the screen to complete the installation. You may need to restart your PC after the installation.
Step 2: Connect Your DVR to Your PC
Next, you need to connect your DVR to your PC using a USB cable. To do this, follow these steps:
Turn off your TV and unplug it from the power source.
Locate the USB port on your DVR. It is usually located on the back or side of your TV.
Connect one end of the USB cable to the USB port on your DVR and the other end to a USB port on your PC.
Turn on your TV and wait for it to boot up.
Step 3: Update Your DVR Firmware with MStar ISP Tool
Finally, you need to use MStar ISP tool to update your DVR firmware. To do this, follow these steps:
Launch MStar ISP tool on your PC. You should see a window like this:
Select the COM port that corresponds to your USB connection. You can check this in the Device Manager of your PC.
Select the firmware file that matches your DVR model. You can find this in the MStar ISP tool zip file that you downloaded earlier.
Click on Start to begin the firmware update process. You should see a progress bar like this:
Wait for the firmware update process to finish. It may take several minutes depending on the size of the firmware file.
When the firmware update process is done, you should see a message like this:
Click on OK and close MStar ISP tool.
Disconnect your USB cable from your PC and your DVR.
Restart your TV and enjoy the new firmware features.
If you encounter any problems while updating your DVR firmware with MStar ISP tool, you can try the following tips:
Make sure you have downloaded the correct MStar ISP tool zip file and firmware file for your DVR model. You can check the model number on the back or side of your TV.
Make sure you have installed the MStar ISP tool correctly on your PC. You may need to run it as administrator or in compatibility mode.
Make sure you have connected your DVR and your PC properly with a USB cable. You may need to try a different USB port or cable.
Make sure your TV and your PC are turned on and not in sleep mode during the firmware update process.
Make sure you do not interrupt the firmware update process by unplugging the USB cable, turning off the TV or the PC, or closing MStar ISP tool.
If the firmware update process fails or gets stuck, you can try to restart MStar ISP tool and repeat the steps. You may need to reset your DVR by unplugging it from the power source and plugging it back in.
If you still cannot update your DVR firmware with MStar ISP tool, you can contact the customer service of your TV brand or visit their official website for more support.
In this article, we have shown you how to update your MStar DVR firmware with MStar ISP tool. This is a simple and effective way to improve the performance and stability of your DVR, as well as fix some bugs and add new features. We hope this article has been helpful for you. If you have any questions or feedback, please feel free to leave a comment below. 29c81ba772